Custom Locking HunterTuned Injector Tophats + Lower Washers

Meant For B/D/H Series. Or Converting LS2/HunterTuned Injectors to LS1 Height
K Series DO NOT NEED FOR MOST SETUPS.

These injector tophats will convert the LS large style o ring down to honda size o ring and add height to the injector for a plug and play install.

Now included are 1/2 inch washers for the lower portion of the injector to seat against the intake manifold on b/d/h series to prevent injector from going to far into the lower grommet.

This kit is designed to be cheap insurance and prevent fuel leaks!

These tophats will come with the locking clip and top o ring. No worries about leaking tophats! safety in mind when designing these.

NOTE : The O ring supplied with the tophats tend to be a snug fit and can tear upon install without proper lube applied. Thin film of grease/oil should be applied on install to prevent o ring damage.

FREE US SHIPPING