Custom HunterTuned Lower Injector Hat Grommet Conversion
Meant For B/D/H/F Series. Or Converting LS2/HunterTuned Injectors to seat into the lower portion of the intake manifold and seal with the lower o ring on the injector instead of using the lower factory grommet which can be a loose fit sometimes. This is the best solution to prevent boost/vacuum leaks at the base of the injector and have a much cleaner style install.
K Series DO NOT NEED FOR MOST SETUPS.
These lower hats will also prevent the injector from pushing into the intake manifold under high fuel pressure situations preventing fuel leaks! Safety in mind when using these!
Some fuel rail shimming or spacing is usually required!
NOTE : The O ring supplied with the adapters tend to be a very tight fit and can tear upon install without proper lube applied. Thin film of grease/oil should be applied on install to prevent o ring damage.
FREE US SHIPPING